 首頁 \ 關于遠東
|
| 首頁 關于遠東 產品目錄 銷售網絡 生產設備 公司資質 技術支持 聯系我們
 提高輕工業電器能耗需采用高效泵設備
電機是一種應用量大、使用范圍廣的高耗能動力設備。據統計，我國電機耗電約占工業用電總量的60%～70%。實際應用中，我國電機的整體運行狀況，同國外相比差距很大，機組效率約為75%，比國外低10%左右；系統運行效率為30～40%，比國際先進水平低20～30%。因此，我國的電機應用具有極大的節能潛力，推行電機節能勢在必行。
Motor is a kind of are big, the wide use of energy intensive power equipment.According
to statistics, China's electric power consumption accounts for about 60% ~
70% of the total industrial power.In practical application, the overall health
of the motor, a big gap compared with foreign, unit efficiency is about 75%,
about 10% less than abroad;System efficiency is 30 ~ 40%, 20 ~ 30% lower than
the international advanced level.Therefore, application of motor in our country
has a great energy saving potential, promote motor energy conservation is imperative.
目前電機能耗狀況是：與發達國家相比，我國電力能源利用效率仍然較低，尤其是工業用電設備電能消耗高，浪費情況較為嚴重。大量的工業設備如風機、泵類設備以及傳統的工業縫紉機、機械加工設備等，多采用交流電動機恒速傳動的方案運行，導致交流電動機效率普遍較低。
Motor energy consumption is at present: compared with the developed countries,
our country electric power energy efficiency is still low, especially the industrial
electric power consumption of the equipment are high, waste is serious.A large
number of industrial equipment such as fans, pumps and traditional industrial
sewing machines, mechanical processing equipment, with ac motor constant speed
transmission scheme, operation result in ac motor efficiency is generally low.
傳統的工業縫紉機電機是一款交流離合器電機，效率僅為40～50%；電機在工作時，不論縫制布料厚薄，始終全功率輸出；在縫紉機待料待機時，電機通過離合器脫開負載，繼續空載運行，造成極大的待機損耗。The
traditional industrial sewing machine motor is an ac clutch motor, efficiency
was only about 40 ~ 50%;Motor at work, regardless of sewing fabric thickness,
always full power output;When sewing machine work on standby, motor by clutch
release load, to continue running light, caused a great deal of standby loss.
根據美國能源部的一項數據顯示，如果采用最新的高效率電機設備和一定的變頻調速裝置來替代舊的電機設備，工業用戶至少能在現有基礎上節省電能18%以上。目前許多國家均已指定流量壓力控制必須采用變頻調速裝置取代傳統方式，我國也在積極鼓勵工業企業采用高效、節能的電動機、鍋爐、窯爐、風機、泵類等設備。目前，我國在家電行業已逐步采用變頻調速控制技術以降低能耗，而工業控制領域中的許多速度調節方法還停留在傳統技術層面上。
According to the U.S. department of energy (doe), according to a data if using
the latest equipment and high efficiency motor of variable frequency speed
regulating device to replace the old machine equipment, based on the existing
industrial users can at least save electric energy more than 18%.Now many countries
have been specified flow pressure control variable frequency speed regulating
device must be used to replace the traditional way, in our country are also
actively encouraging industrial enterprises with high efficiency, energy saving
motor, boilers, furnaces, fans, pumps and other equipment.At present, in the
home appliance industry in China has gradually adopt frequency control of motor
speed control technology to reduce energy consumption, and many in the field
of industrial control speed regulation method with the traditional technology
level.
在工業生產、產品加工制造業中，風機設備主要用于鍋爐燃燒系統、烘干系統、冷卻系統、通風系統等場合，根據生產需要對爐膛壓力、風速、風量、溫度等指標進行控制和調節以適應工藝要求和運行工況。而最常用的控制手段則是調節風門、擋板開度的大小來調整受控對象。這樣，不論生產的需求大小，風機都要全速運轉，不能隨運行工況的變化進行相應的調節，白白浪費了大量的能量。在生產過程中，不僅控制精度受到限制，而且容易造成設備損耗，從而導致生產成本增加，設備使用壽命縮短，設備維護、維修費用居高不下。In
industrial production, product processing and manufacturing, fan equipment
is mainly used for boiler combustion system, drying system, cooling system,
ventilation system, etc, according to the production needs of furnace pressure,
wind speed, air volume, temperature indicators such as control and adjust to
meet the technological requirements and operation condition.The most commonly
used means of control is damper, the baffle opening to adjust the size of the
controlled object.In this way, regardless of the demand of production size,
the fan will run at full speed, cannot adjust accordingly along with the change
of operation condition, a large amount of energy wasted.In the process of production,
not only the control precision is restricted, and easy to cause loss of equipment,
which can lead to the cost of production increases, the equipment service life
is shortened, equipment maintenance, maintenance costs high.
泵類設備在生產領域同樣有著廣闊的應用空間，提水泵站、水池儲罐給排系統、工業水(油)循環系統、熱交換系統均使用離心泵、軸流泵、齒輪泵、柱塞泵等設備。根據不同的生產需求往往采用調整閥、回流閥、截止閥等節流設備進行流量、壓力、水位等信號的控制。這樣，不僅造成大量的能源浪費，管路、閥門等密封性能的破壞；還加速了泵腔、閥體的磨損和汽蝕，嚴重時損壞設備、影響生產、危及產品質量
Pump equipment also has a wide application in the field of production space,
numerical station, tank storage tank to the exhaust system, industrial water
(oil) circulation system, heat exchange system using centrifugal pump, axial
flow pump, gear pump, plunger pump and other equipment.According to different
production requirements often USES the adjusting valve and return valve, globe
valve throttling devices such as flow, pressure, water level control signal.In
this way, not only caused a lot of energy waste, the destruction of the pipeline,
valve sealing performance;Also accelerated the pump cavity, the body of the
wear and cavitation, serious damage to the equipment, affect production, and
threaten the quality of the products
| 密封膠輸送泵 |
NYP320B-RU-T1-W11高粘度泵 |
江西昌九生物化工股份有限公司 |
| 高粘度乳液泵 |
SNH660R46K2W2三螺桿泵 |
甘肅（甕福）化工有限責任公司 |
| 改性硅油輸送泵 |
SNH660R46K2W2三螺桿泵 |
河北三高集團安增肥業有限公司 |
| 糖漿輸送泵 |
G135-2單螺桿泵 |
江蘇九九久科技股份有限公司 |
| 輸送齒輪油泵 |
SNH660R46U12.1W2三螺桿泵 |
江蘇藍豐生物化工股份有限公司 |
| 合成原油渣泵 |
SNH660R51U12.1W2三螺桿泵 |
北京恒聚化工集團有限責任公司 |
| 輸送橄欖油泵 |
SNH80R36U12.1W21泵頭 |
浙江威爾達化工有限公司 |
| 污油輸送泵 |
NYP200B-RU-T1-J-W11高粘度泵 |
郴州華湘化工有限責任公司 |
| 造紙黑液輸送泵 |
G25-1V-W101單螺桿泵 |
廣州珠江輪胎有限公司 |
| 輸送變壓器油泵 |
SNH940R42U12.1W21三螺桿泵船用 |
河南慶安化工高科技股份有限公司 |
| 輸送石蠟泵 |
SNH940R46E6.7W21三螺桿泵 |
江蘇克勝集團股份有限公司 |
| 輸送廢油泵 |
SNS210R46U12.1W2立式三螺桿泵 |
山東三方化工集團有限公司 |
| 稀釋瀝青裝船泵 |
SNS40R54U12.1W2三螺桿泵頭帶支架 |
河北新化股份有限公司 |
| 輸送瀝青泵 |
SPF20R38G10W2三螺桿泵船用 |
呼和浩特橡膠機械廠 |
| 瀝青加壓輸送泵 |
NYP220-RU-T1-W11高粘度泵 |
四川省廣漢市蜀峰化工有限公司 |
| 輸送重油泵 |
SMH80R46E6.7W23三螺桿泵 |
江蘇嘉隆化工有限公司 |
| 點火供油泵 |
SMH120R42E6.7W23三螺桿泵 |
江蘇劍牌農藥化工有限公司 |
| 鋼鐵廠稀油站液壓油泵 |
KCB-300齒輪泵 |
浙江力禾集團有限公司 |
| 重油輸送泵 |
KCB-300齒輪泵 |
江蘇金茂源生物化工有限公司 |
| 輸送橄欖油泵 |
SNH440R52U12.1W21三螺桿泵 |
石家莊新宇三陽實業有限公司 |
|
